My next post reveals the whole teeth whitening process from the beginning to present supplied by Smile Brilliant!
This is the teeth whitening creation tray you receive above. It consists of;
– 3 x Catalyst pastes
– 3 x Base pastes
– 2 x gum shield mould creators
– 3 / 6 / 9 Teeth whitening gel syringes depending on order
You start by taking one catalyst and one Base paste (blue & white) and kneeding them together for 30 seconds or so to create a putty.
Once created this putty is then lined into one of the gum guard tray provided ready to create your teeth prints.
Once you’ve lined the tray with the putty you insert one into the top teeth and bite down fairly firm and hold that position for around two minutes or so…
Once done, remove and repeat with the bottom teeth. Ensure to do one set of teeth at a time right from mixing the pastes as the putty will
dry and go hard if both mixed and applied together. (You have a spare set of paste to mix in case one row of teeth goes wrong.)
Once you’ve done both set of teeth you can place the whole mould, shield and putty somewhere to dry for approx 30 minutes before peeling your personalised gum moulds from the tray.
Once you’ve peeled them away you will be left with the above. If completely dry and stiff, you can wash the moulds and pop them in the return jiffy bag along with your return form. (The return form includes your name and address so they know who’s moulds they are.)
Once that is done you then just wait. When the dentist has transformed your moulds into silicone teeth moulds they will then be sent back ready for your home teeth whitening process!
These silicone moulds are created in a unique process. Using your blue putty moulds the dentist creates a skeleton mouth mould of your teeth to perfection…
Then from these your new silicone moulds can be created and cut! Just stopping near the gum line and each tooth individually acquiring their unique shape and size using a 3 step process…
That’s the technical bit just for anyone who was curious as to how they’re so intricately created as you don’t normally receive the original mould or skeleton form back in the post.
With your new moulds, you simply brush your teeth using just water if possible (As some toothpaste will slow the whitening reaction down).
Then take your desensitising syringe and apply a string like motion to the shields…
One you have like a string line of gel in the bottom of the shield you insert them and wait for around 20 – 60 minutes prior to teeth whitening gel application. (This will not
whiten just desensitise before whitening).
Once time has elapsed you then wash teeth and shields out before repeating previous syringe application steps but with teeth whitening gel this time…
This is the green ended syringe. Once you’ve applied a string of this to your washed gum shields you can pop in your shields for anywhere between 45 minutes to 3 hours depending on sensitivity and if you have the time.
Once removed wash / brush teeth clean with water and reveal whiter teeth even after first use!
Each syringe will last 3 – 4 applications of both shields.
I’ve used my shields around 4 – 5 times and varying in application time between 45 minutes and 3 hours and here are my personal results from before to present!!
My teeth are like completely new teeth! As a non
smoker and occasional coffee drinker I thought my teeth looked ok before and it wasn’t until I compared the results I really understood about the different shades teeth can become!
You have just got to take a look at the website and other customer pictures on Instagram and Facebook!! See for yourself what all the fuss is about and these results are permanent with good aftercare or upkeep not just a
As always let them know Beauty By Trial sent you 😆